Need help?Do you have a question about the GeoVision GV-Video Server and is the answer not in the manual?
Provides step-by-step instructions for connecting the GV-Video Server to a network.
Guides on how to assign an IP address to make the GV-Video Server accessible.
Explains how to view live surveillance images via a web browser.
Configuration for video settings, motion detection, privacy masks, and tampering alarms.
Configuring digital inputs, outputs, and PTZ camera connections.
Setting up notifications for events like motion detection or I/O triggers via email or FTP.
Starting and stopping recording or I/O monitoring manually or via schedule.
Configuring network settings like IP address, DHCP, and PPPoE.
Managing system settings like date/time, storage, and user accounts.
Steps to enable and configure the recording function for video and audio.
Methods for playing back recorded video files from the GV-Video Server.
Procedures for updating the GV-Video Server firmware via web interface or utility.
Procedures for backing up and restoring server configurations.
Activating and using GPS tracking features for vehicle location.
Procedures to reset the GV-Video Server to its original factory default settings.
Adding and configuring GV-Video Servers within the GV-System.
Setting up connections and preferences for the Center V2 monitoring station.
To Next Page
General
