Need help?Do you have a question about the GeoVision GV-VS2420 and is the answer not in the manual?
General| Model | GV-VS2420 |
|---|---|
| Category | Server |
| Video Input Channels | 24 |
| Video Compression | H.264, MJPEG |
| Maximum Resolution | 1920 x 1080 |
| Audio Compression | G.711 |
| Power Supply | AC 100V~240V, 50/60Hz |
| RAM | 4 GB |
| Maximum Frame Rate | 30 fps |
| Storage Capacity | Up to 8 TB |
| Audio Input/Output | 1 in / 1 out |
| Ethernet | 10/100/1000 Mbps |
| Protocols | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, DNS, DDNS |
| Operating Temperature | 0 ~ 50 °C / 32 ~ 122 °F |
| CPU | Intel Celeron |
| Storage | HDD |
| Operating System | Linux |
| Network Interface | 10/100/1000 Mbps Ethernet |
Provides step-by-step instructions for connecting the GV-Video Server to a network.
Explains how to find the assigned IP address using the GV-IP Device Utility.
Guides users on how to assign a static IP address or configure network settings.
Details the process of accessing live surveillance images through a web browser.
Covers multicast, video settings, motion detection, privacy mask, text overlay, and tampering alarm.
Explains settings for digital inputs/outputs, PTZ control, GPS, and buzzer.
Details configuring alerts for motion detection or I/O triggers via email, FTP, Center V2, etc.
Allows starting recording manually, by schedule, or by input trigger.
Enables setting up recording and I/O monitoring schedules for cameras.
Covers LAN settings, wireless client mode, TCP/IP, UMTS, multicast, IP filter, and SNMP.
Instructions for integrating GV-Video Server cameras with GV-DVR/NVR systems.
Details on configuring GV-Video Server cameras within the GV-VMS software.
To Next Page
