Administrator Mode
4
4.4 Monitoring
You can start recording manually, by schedule or by input trigger.
Figure 4-28
[Manual] Manually activates motion detection and input monitoring. Select one of the
following options and then click the Start button.
Select all: Manually start recording and input monitoring as well.
Camera x: Manually start recording. Select the desired camera and the recording
mode for recording.
I/O Monitor: Manually start input monitoring. When the input is triggered, its
associated camera and output will also be activated for recording and alerting. For
input and output settings, see 4.2.2 Input/Output Settings.
[Schedule] The system starts recording or input monitoring based on the schedule you set.
For schedule settings, see 4.5 Recording Schedule.
71
To Next Page
Loading...
Need help?
General
