Getting Started
15
2
IMPORTANT:
• PPPoE should only be enabled if you know which IP address the GV-Video
Server will get from the ISP. Otherwise, you must use the Dynamic DNS service
to obtain a domain name linked to the GV-Video Server’s changing IP address
first.
For details on Dynamic DNS Server settings, see 4.7.3 Advanced TCP/IP.
• If PPPoE is enabled and you cannot access the unit, you may have to reset it to
the factory default settings and then perform the network settings again.
To restore the factory settings, see the Default button in 1.7.1 Front View.
2.4 Configuring the Basic
Once the GV-Video Server is properly installed, the following important features can be
configured using the browser-based configuration page and are discussed in the following
sections in this manual:
• Date and time adjustment: see 4.8.1 Date and Time Settings.
• Login and privileged passwords: see 4.8.4 User Account.
• Network gateway: see 4.7 Network.
• Camera image adjustment: see 3.2.2 The Control Panel of the Live View Window.
• Video format, resolution and frame rate: see 4.1.2 Video Settings.
To Next Page
Loading...
Need help?
General
