177
F. The CGI Command
Note this function is supported by GV-VS04H (Firmware Version 1.03 or later), GV-VS11,
GV-VS12 (Firmware Version 1.04 or later) and GV-VS14.
You can use the CGI command to obtain a snapshot of the live view or access the User
Account Web interface. For the GV-Video Server with the following details:
IP address: 192.168.2.11
Username: admin
Password: admin
Desired stream: 1
To obtain a snapshot of the live view, type the following into your web browser:
http://192.168.2.11/PictureCatch.cgi?username=admin&password=admin&channel=1
To access the User Account Web interface, type the following into your web browser:
http://192.168.2.11/ConfigPage.cgi?username=admin&password=admin&page=UserSetting
Note: For GV-VS11 and GV-VS12, if the resolution is set as 704 x 480 (704 x 576), the
obtained snapshot will be 704 x 240 (704 x 288).
G. Default Port Value
HTTP Port 80
Streaming Port 10000
E-Mail Server 25
FTP Server 21
Center V2 5551
VSM 5609
GV-GIS 3356
Video Gateway 50000
Backup Center 30000
ViewLog Server 5552
RTSP/TCP Port 8554
RTP/UDP Port 17300 -17319
To Previous Page
Loading...
Need help?
General
