GEPRC CineLog30 User Manual

6 / 15
Bind TBS NanoRX:
1. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the TOOLS – CROSSFIRE
SETUP – XF Micro TX ,and select Bind.
2. Turn on the receiver while holding the bind button on the receiver, release the button and the green LED
on flash .and then holding the button for 8 second ,and release. And the green light is off and the red
light is flashing, ‘update micro RX？’ will appear on the transmitter screen, and select ‘ENTER’.
3. Wait for the update to complete, the binding is successful, and the receiver green light is on.
1
2
3
4
5
6
Bind Button
Binding
Binding Successful

GEPRC CineLog30 Specifications

General

Brand	GEPRC
Model	CineLog30
Category	Quadcopters
Language	English