Gerhardt Vap 30 - 4 Assembly and Installation; Setup

C. Gerhardt GmbH & Co. KG
10
VAPODEST 30
3 Delivery
Check for transport damage
Before assembling the instrument please check if the contents of
the box is complete and intact!
In case of any damage, please notify your carrier (post, rail, road)
and obtain an expert’s report!
The exact contents of the delivery can be checked by the follo-
wing list.
Parts list
– Distillation system Vapodest 30, complete
– Tubing set:
1 x Water inlet tube 10/17mm with connections of 1/2 inch and
3/4 inch, 2m
1 x Verprene tube 8/12 mm. 2 m
2 x PVC tube 4/7 mm, 2 m
2 x PVC tube 8/12 mm, 2m
2 x PVC pipe 6 x 1 mm, 420 mm
1 x PVC pipe 10 x 1 mm, 420 mm
– 1 x Mains cable
– 1 x Kjeldatherm digestion tube 250 ml or 100 ml