Gerhardt Vap 30 - Operating Conditions

C. Gerhardt GmbH & Co. KG
4
VAPODEST 30
1 Technical description
Warranty conditions
The Vapodest 30 is manufactured following the high quality guide-
lines of DIN EN ISO 9001.
On the basis of the C. Gerhardt conditions of warranty our pro-
ducts are guaranteed for 1 year, as long as the apparatus is used
in accordance with the instructions mentioned in this manual.
Please note that the semi-consumable parts are excluded from
warranty.
Technical data
Voltage: .................... 230 V AC, 50 Hz
Wattage: ................... 1600 W
Cooling water:........... about 3 litre per distillation minute
Cooling wat. pressure > 1,3 bar
Pump capacity:
-Diaphragm pump .... about 10 ml/s
-Peristaltic pump ...... about 10 ml/s
Store tank: ................ any size, recommended: KAN 30
Micro controller: ........ Single-chip MCU
Display:..................... 5 x 7 LED
Program: ................... 1
Interface: .................. RS 485
Dimensions: .............. 440 x 690 x 340 mm (W x H x D)
Weight: ..................... 27 kg
Baud-rate: ................. 9600
Data-bits: .................. 8
Parity: ....................... No
Start bit: .................... 1
Stop bit: .................... 1
Mode: ....................... Semi-Duplex
User: ......................... Maximum 32
Connection: .............. D-Sub 9-pin acc. to DIN 41 652
Warranty
Distillation
System
Interface