C. Gerhardt GmbH & Co. KG
15
Display/Keys Meaning within program mode
Display program step
Time in seconds or minutes,
The Vapodest is delivered with the se-
cond-mode. In order to be able to switch
between the second- and the minute-
mode, please proceed as described:
- Press the key 'Prog' when turning on
the instrument - Display point flashes
Prog: check, memorize and
confirm programm
Run: Start data transfer in
synchronous mode (on-line activated))
„+“: Increasing actual value to
desired value
„-“: Decreasing actual value to
desired value
Reset:
Interruption of programming,
return to start position
Key On-line pressed:
Control LED illuminated,
RS 485 interface is activated
Programming status H2O:
Control LED flashes
Programming status NaOH:
Control LED flashes
Programming status distillation:
control LED flashes
Programming status suction:
control LED flashes
Program mode
PROGRAMMING
To Next Page
Loading...