C. Gerhardt GmbH & Co. KG
17
Step Program status Time Confirmation
Start Start position
1 Addition H
2
O Range:
0 to 30 s
Preset:
5 s
2 Addition NaOH Range:
0 to 30 s
Preset:
12 s
Programming the Vapodest 30
Each Vapodest undergoes a pre-delivery performance test in the
quality assurance department before leaving C. Gerhardt. On arri-
val the machine is supplied with the test program.
If you wish to keep this program, please confirm the program steps
with the „Prog“ key. If changes are required, please press either
the „+“ or „-“ keys at the relevant step, and then store with the
„Prog“ key.
Programming the
distillation system
PROGRAMMING
To Next Page
Loading...