C. Gerhardt GmbH & Co. KG
24
VAPODEST 30
Error messages Cause of error Measures
No cooling water Check cooling
water inlet,
display flashes
No sample tube Insert tube,
(start of distillation display flashes
not possible)
Lack of water in Check the
the water inlet
steam generator distilled H
2
O
Filling of the Display shows
steam generator last step,
flashes on
stand by
Sensor error Switch the
(water level in system off and
steam generator call service
is no longer
measured)
7 Error messages
The micro-processor continually surveys all the functions of the
distillation system. As soon as an error arises it is shown on the
display and accompanied by an acoustic signal.
To Next Page
Loading...