German pool PAC-CH416-SC - Page 16

P.16
Operation Instructions
Off-Timer
To Set Off-Timer (time for product to automatically turn off):
1. Turn on the product, tap Timer / WiFi Key to enter Timer Settings. Timer Indicator Light lights
up constant.
2. Tap Increase Key /Decrease Key to set on-timer from 1-24 hr. LED Display blinks timer
duration.
3. If product does not receive any commands in 3 seconds, it will automatically conrm timer, and
LED Display will switch back to show set temperature (if Cool Mode/Heat Mode has been
selected) or show current room temperature (if Dry Mode or Fan Mode has been selected).
On-Timer
To Set On-Timer (time for product to automatically turn on):
1. In standby state, tap Timer / WiFi Key to enter Timer Settings. Timer Indicator Light lights up
constant.
2. Tap Increase Key /Decrease Key to set on-timer from 1-24 hr. LED Display blinks timer
duration.
3. If product does not receive any commands in 3 seconds, it will automatically conrm timer, LED
Display will show timer countdown.
4. Select mode, fan speed and temperature. When countdown hits zero, product will automatically
start to run in user’s selected setting.
Cancel Timer
1. Tap Timer / WiFi Key to enter Timer Settings, tap Increase Key /Decrease Key until
the timer reaches “0”.
2. If product does not receive any further command in 3 seconds, it will automatically cancel the
timer, and Timer Indicator Light will go dark.