EasyManua.ls Logo

Gesan DPR 100 - Emergency Stop and Diagnostic Functions

Gesan DPR 100
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
17
RENTAL SERIES
ELECTRICAL GENERATOR
16
17
RENTAL SERIES
ELECTRICAL GENERATOR
EARTH LEAKAGE CIRCUIT BREAKER (ELCB):
Protection against earth leakage of one phase, setting off the electrical generator’s primary protection switch.
Configured to be activated when voltage is exceeded by 3 mA, with a time delay of 0s.
Includes a TEST button for checking the state of the ELCB.
It is the installer’s responsibility to adjust and seal the ELCB according to the current regulations.
GAUGES INDICATING ENGINE PARAMETERS:
Oil pressure.
Intensity of battery voltage.
Engine temperature.
Fuel level.
DIAGNOSTIC BUTTON:
A
llows engine parameters to be checked when electrical generator is stopped (electronically controlled
engines). Also gives a readout of the generator’s different alarms.
EMERGENCY STOP BUTTON:
Pressing this button brings the electrical generator to an immediate stop. To cancel, turn to the left, when the
end of the emergency situation has been confirmed.
On soundproofed units the emergency stop button is installed apart from the electrical panel (built into the
canopy).