7
SMART SOS USER MANUAL
If the device detects an SOS
condition (vehicle overturned),
SOS will flash on the display.
If the device is in update mode,
UPD will flash on the display.
For the first 5 seconds,
---ON appears on the display. This
indicates that the device is picking up the
engine’s vibrations correctly.
If the device is in SOS calibration mode,
CAL will flash on the display.
ENGINE RUNNING
SOS STATUS ACTIVE
REQUIRES GET SMART SOS APP
CALIBRATION STATUS
REQUIRES GET SMART SOS APP
SYSTEM UPDATE
REQUIRES GET SMART SOS APP
To Next Page
Loading...