31
CAUTION:
After the Tablet PC has been fully recharged, do not immediately
disconnect and reconnect the AC adapter to charge it again. Doing so
may damage the battery.
After the Tablet PC has been fully recharged, do not leave it on the
cradle with AC power connected for a long period of time. This is to
avoid repeated charging.
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time or
when the actual operating time of a battery pack is much less than expected.
Initializing is the process of fully charging, discharging, and then charging. It
can take several hours.
A software tool called “Gauge Reset” is provided for the purpose. Use the
G-Manager program and select the Battery tab to find the tool.
Checking the Battery Level
NOTE: Any battery level indication is an estimated result. The actual
operating time can be different from the estimated time, depending on
how you are using the Tablet PC.
The operating time of a fully charged battery pack depends on how you are
using the Tablet PC. When your applications often access peripherals, you
will experience a shorter operating time.
You can check the approximate battery level using the battery meter function
of the operating system. To read the battery level in Windows, tap the
battery
icon on the taskbar.
To Next Page
Loading...
Need help?
General
