Getac K120 - Turning On and Off the Computer

5
Turning On and Off the Computer
Turning On
Press the power button ( ) for at least 2 seconds until the Power Indicator
lights up. The Windows operating system should start.
Turning Off
When you finish a working session, you can stop the system by turning off the
power or leaving it in Sleep or Hibernation mode:
To...
Do this...
Power off
(Shutdown)
Click  Power  Shut down.
Sleep
Use one of these methods:
 Press the power button.*
 Click  Power  Sleep.
Hibernate
By default, this option is not shown in the Start menu. If you
want to use the feature, set up accordingly in Windows settings.
* “Sleep” is the default result of the action. You can change what the action
does through Windows settings.