EasyManua.ls Logo

Getac VR-X20 - Safety and Usage Precautions; General Safety Cautions; Battery Handling Cautions

Getac VR-X20
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
4
. Cautions and Notices
This equipment is designed for use and installation in a vehicle. It can be
mounted in a vehicle’s center console or trunk. Installation must be performed
by professionals.
The equipment should be connected only to PoE networks without routing
to the outside plant.
Safety Cautions
This symbol (a lightning flash in a triangle) is intended to alert the user
to the presence of uninsulated voltage within the product’s enclosure
that can be high enough to constitute a risk of electric shock to human
bodies.
This symbol (an exclamation mark in a triangle) is intended to alert the
user to the presence of important operating and maintenance information
in the document(s) accompanying the product.
This equipment must be grounded before input power is connected.
To reduce the risk of electric shock, do not remove the cabinet cover. There
are no user-serviceable parts inside. Contact qualified service personnel if
servicing is required.
Do not expose the equipment to rain or moisture. Keep the equipment away
from risks of dripping or splashing liquids.
Use the recommended accessories only.
Allow adequate ventilation around the unit. Do not cover or block any
ventilation openings. There must be at least 4 cm (1.6 inch) clearance at both
sides of the unit to permit unobstructed airflow both to and from the unit.
Battery Cautions
There is danger of explosion or fire if the battery is handled improperly.
Replace only with the same or specified type.
Do not disassemble or dispose of in fire.
Do not store in temperatures above 60 °C (140 °F).
Use specified charger for rechargeable batteries.
Air inlet Air outlet