10
3
. Accessing the Expansion Slots
NOTE: After removing screws, be sure to keep the screws and remember where
they were removed. All screws are required for later use.
The expansion slots are inside the Expansion Unit. To access the expansion slots,
you have to partially disassemble the Expansion Unit.
1. Remove the four battery packs and the optical disc drive.
To remove a battery pack, pull its ribbon strip toward the right to unlock and
then pull the battery pack out of the compartment.
To remove the optical disc drive, pull its ribbon strip upward to unlock and
then pull the drive out of the compartment.
2. Remove the four corner bumpers by unfastening three screws from each
bumper.
To Next Page
Loading...
