3
Installation instructions
5018606-00 Rev.C
Edition 0704
Safety regulations
This machine has been designed with a number of built-in safety devices. To avoid
injury, it is very important that these safety devices are not bypassed and thus
disabled.
The machine must be assembled and installed by
• qualified personnel.
• in accordance with current local regulations and rules.
When the work is complete, check that
• all parts have been installed in accordance with the installation instructions
• all screws have been properly tightened
• there are no sharp edges on any parts that may come into contact with people
• all hoses, pipes and connections are intact and free from defects
• all the functions of the machine are working properly. Adjust if necessary.
Product liability
Any modification or incorrect use of the equipment without the approval of Getinge
Disinfection AB invalidates Getinge Disinfection AB’s product liability.
Isolating device
The machine should be fitted with a separate isolating device in the electric power
supply. The isolating device must be easily accessible on a wall close to the
machine.
Attention symbols
Some of the warnings, instructions and advice in this manual are so important that
we use special symbols to draw attention to them. The symbols used are as follows:
This symbol indicates a warning in the text of the manual. The nature of the
hazard that the warning relates to is such that it may result in more or less
severe injury and in certain cases mortal danger.
It also highlights warnings to avoid damage to equipment.
Safety regulations
To Next Page
Loading...
Need help?
General
