Getinge 46-2 Instructions For Use

19
Instructions for use5018610-00 Rev.D
Edition 0703
Printer (optional)
Replacing the paper roll
• Open the front door of the printer.
• Remove any paper residue.
• Fold down the printing mechanism by pressing the latch marked PUSH (A).
Inspection
• Cut the end of the new roll square (B). (This makes it easier to thread the paper
into the printer mechanism.)
• Insert the paper into the opening of the print mechanism and press the FEED
(C) button on the printer. The paper is now automatically fed through the printer
mechanism.
• Fold away the printing mechanism and lock it with the latch (D).
• Tear off the paper and close the front panel of the printer.
• The printer is now ready to use again.
Never use the printer without paper and/or ink ribbon.
Do not pull on the printer feed when the printer is on.
A
B
D
C
V1972
V1973
V1973

Getinge 46-2 Specifications

General

Brand	Getinge
Model	46-2
Category	Washer
Language	English