5.4 Sealing procedure
This is how to start the transport motor:
−
Press button (1) (motor runs).
−
indicator lamp (2) gives a steady green light.
−
Press button (3) (motor stops).
)
Important
►
When the packaging material is fed in, the paper
side should be down.
►
We recommend switching off the motor when the
sealer is not in use (eg during breaks).
6 Technical data
SEALER GS 43
Dimensions w x d x h 570 x 280 x 240 mm approx
Dimensions with paper
guide
575 x 320 x 240 mm approx
Weight 13 kg approx
max. sealing temperature 200 °C
Transport speed 9.8 m/min
Seal seam dimensions 4 x 2.5 mm approx
max. power consumption 740 W
Power supply 230V (115V) / 50Hz (60Hz)
Mains fuse 3.15 A slow (115V: 6A slow)
Every GS 43 sealer is set up to produce a seal seam that complies with
DIN 58953-7. Every sealer has a certificate of initial validation.
GS-43-GB-002.doc
9
To Next Page
Loading...