What to do if the bag is too small for the printer text on my Getinge ProSeal Classic?
If the printer text doesn't fit on the pouch in your Getinge Food Saver, either use a larger pouch, adjust the printed text length as described in chapter 7.9, or decrease the dot spacing in the printer menu.
General| Brand | Getinge |
|---|---|
| Model | ProSeal Classic |
| Category | Food Saver |
| Language | English |
Details ESD protection requirements and initial steps for maintenance and repair.
Identifies hazards like electric shock, burning, and entrapment during operation.
Lists the essential tools required for servicing and repairing the sealing unit.
Step-by-step instructions for safely opening the sealing unit's housing.
Process for disconnecting wiring and removing the base frame from the unit housing.
Instructions for replacing PTFE tape on heating rails and belt guides.
Procedure for replacing worn transport belts during preventive maintenance.
Guidance on exchanging the printer ribbon for ProSeal Premium models.
Instructions for inspecting and replacing the upper pressing wheel.
Instructions for inspecting and replacing the lower pressing wheel.
Comprehensive list of error codes with causes and suggested solutions.
Procedure for checking and replacing the print head on ProSeal Premium units.
Detailed steps for repairing or replacing the printer head on ProSeal Premium units.
Instructions for disconnecting, removing, and installing a new control board.
General procedures for reassembling various unit components after repair.
Lists and describes the components of the ProSeal validation kit.
Procedures for logging in and validating pressure, speed, and temperature for ProSeal Classic.
Procedures for logging in and validating pressure, speed, and temperature for ProSeal Plus/Premium.
To Next Page