Getinge ProSeal Classic User Manual

SERVICE MANUAL ProSeal Classic/Plus/Premium
29
5.3.1 Logging in
A service technician can use the service functions of the unit after logging in the
“service login”. The service password is 8729. Without this password, the
configuration settings can be viewed but cannot be changed.
Press Menu Press Service login
Enter password 8729 Press Configuration
Press OK to log in
Press Service to enter service menu
 After logging in, the validation menu can be reached to navigate to the service
menu. In this menu press validaton to reach the validation menu (Pic 44).
Pic 44
5.3.2 Pressure
Pic 45
In the pressure menu (Pic 45) the pressure set point and the measured pressure can
be seen. Both values should be equal(±1N). If there is a difference you can change
the measured pressure by adjusting screw (1) (Pic 46).

Getinge ProSeal Classic Specifications

General

Brand	Getinge
Model	ProSeal Classic
Category	Food Saver
Language	English