Getinge ProSeal Classic User Manual

SERVICE MANUAL ProSeal Classic/Plus/Premium
13
 Tension the belt by hand and fasten the belt pulley. (Pic 18)Make sure that the
belt is not sag down.
Pic 18
2.5 Printer (only ProSeal Premium)
We recommend to exchange the printer ribbon each time during maintenance.
 Remove screw (1) and remove lid (2). (Pic 19).
Pic 19
 Unscrew the fastening screws a couple mm to release the printer module. (Pic
20)
Pic 20
 Remove the printer ribbon from the printer module. Pull at the printer ribbon at
the bottom side of the printer module to remove it.(Pic 21)
Pic 21
2
1
1

Getinge ProSeal Classic Specifications

General

Brand	Getinge
Model	ProSeal Classic
Category	Food Saver
Language	English