SERVICE MANUAL ProSeal Classic/Plus/Premium
9
2.3 Replacing the PTFE material
The belt guides and the heating rails are lined with a non-stick strip (PTFE tape). It is
non-stick so your pouches will not stick on the heating rails. It is also on the belt
guides which expands the life of the transportation belts.
For preventive maintenance the PTFE material on the heating rails and belt guides
must be replaced.
2.3.1 The belt guides
The base frame has been removed from the housing.
Unscrew the belt guides (Pic 8)
Pic 8
Press the upper belt guide down. The top of the upper belt guide can now
move forward and the whole upper belt guide can be removed.(Pic 9)
Pic 9
When the upper belt guide is loose, the lower belt guide can be pulled out.