To Next PageTo Next Page
Need help?Do you have a question about the Gewiss SYSTEM Series and is the answer not in the manual?
General| Brand | Gewiss |
|---|---|
| Model | SYSTEM Series |
| Category | Motherboard |
| Language | English |
Provides an overview of the programmer's function and display unit, highlighting its timed management capabilities.
Details the functions of the programmer's control buttons (MODE, Increment, Decrement, SET/PROG) and VDU signals.
Explains the three operating modes: MANUAL, AUTOMATIC, and OFF, and how to switch between them using the MODE key.
Guides the user through setting the day of the week, hour, and minutes using the SET/PROG and MODE keys.
Details how to personalize daily/weekly programs by setting output status (ON/OFF) and timing.
Describes how to start and use the automatic operating mode, including displaying the hourly profile.
Explains how to activate and use the manual operating mode to set the output status (ON/OFF).
Details the LCD visual display unit, its backlighting, and behavior during parameter setting and programming.
Explains connecting to the GSM remote control unit and using SMS commands for mode and status control.
Describes the device's backup battery function, autonomy, and how programs are retained during power loss.
Lists the default preset parameters for day of the week, time, and manual output status.
Provides an example of installing the programmer using plates and module supports for different series.
Details the cabling terminals for power supply, output relay, and serial line connections.
Explains how to access and remove the programmer's backup battery, recommending a screwdriver for the task.
