8
Turn water off at the inlet (Fig. 1). Open pure water tap to release the pressure inside the
system (Fig. 2). Remove the housing with the help of the wrench (Fig. 3), check and replace
3
1 2
FILTER MAINTENANCE
Cartridge
Noticeable reduction of ltration
rate
Aragon-М, Aragon,
Aragon-2
Mechanical cleaning,
regeneration
Scale and foggy lm formation
on water during its boiling
Aragon-2
BS
Regeneration (removal of
hardness salts)
Water quality reducing РР, РРY, PFM, BAF, BА Replacement
Cartridges should be replaced upon the expiration of their capacity or service life.
direct water
flow
1
1
reverse water flow
2
START UP
Before usage, rinse a lter with water during 2-5 minutes.
Filter is also should be washed after its cartridges replacement and after long (more
than 5 days) break in operation.
into a cap at this level (Fig.
2). For convenient lter
set-up (right or left water
supply), all three inserts
can be flipped through
180° simultaneously, rst
and the last cartridges
can be exchanged. So that
water flow will be changed
(inlet and outlet will be
exchanged).
Only Geyser cartridges are recommended to use in replacement of the used ones.
Failure to comply with this instruction may change a lter functions and
specications.
To Next Page
Loading...
