25
SettingsGC 363 R / SF
ADVANCED menu
0 1
2 3
4
5
6
7
8
9
Back / Continue
RAD: Immunity
low > > > > > > high
RAD: Direction
**
bi
*
uni
uni
EM
uni
WEG
bi
**
Shop
uni
**
Shop
EM
**
Shop
EM: for persons with restricted
mobility
AWAY:direction detection away from
the sensor
Shop:
shops**
*
RAD: Holdtime
0.5 sec.
1 sec. 2 sec.
3 sec. 4 sec. 5 sec. 6 sec. 7 sec. 8 sec.
9 sec.
AIR: Width
AIR: Number
Service
mode
1
2
Service mode = no presence detector for 15 minutes (during maintenance).
This value does not permit conformity of the door system with EN 16005 and DIN 18650.
AIR: Max. time
Movem.
15 sec.
30 sec.
1 min. 2 min. 5 min. 10 min.
20 min.
60 min.
endless
Minimum value for DIN 18650: 1 min
Minimum value for EN 16005: 30 sec
AIR: Output
Normally open
contact
Normally
closed contact
Normally closed
contact
Normally
open contact
Normally closed
contact
Normally
closed contact
Normally open
contact
Normally
open contact
Current
Normally
closed contact
Frequency
Opener
***)
Redirection
Movem. (1)
Movem. (1) or
pres. (2)
Movem. (1)
and pres. (2)
**
Opening output is active in the case of:
(0) Movement detection
(1)
Movement or presence detector
(2) Movement and presence detector
Factory settings
Reset to factory settings.
Full reset
Partial reset
(outputs are not reset)
Back / Continue
**
Not permitted for FR doors
***
Standard setting GC 363 SF
To Next Page
Loading...
