GEZE GC 363 R User Manual

Safety GC 363 R / SF
4
GC363 R
(in the direction of
emergency exit)
GC363 SF
1.2 Safety notices
à The mandatory installation, maintenance and repair work must be per-
formed by properly trained personnel authorised by GEZE. Any attempts
at repairs by unauthorised personnel cancel the factory guarantee.
à The device may only be operated with safety extra-low voltage (SELV)
with electrically protective separation.
à The country-specic laws and regulations are to be observed during
safety-related tests.
à Make sure that the door control cover is tted correctly and earthed.
à If unauthorised changes are made to the system, GEZE cannot be held
liable in any way whatsoever for any resulting damage, and the approval
for use in escape and rescue routes ceases.
à GEZE makes no guarantee for combinations with third-party products.
à Only original GEZE parts may be used for repair and maintenance work.
à Observe the latest versions of directives, standards and country-specic
regulations, in particular:
à ASR A1.7 "Doors and gates"
à DIN 18650 "Building hardware – Automatic door systems"
à DIN EN 16005 "Power operated pedestrian doorsets – Safety in use –
Requirements and test methods"
à Accident-prevention regulations, especially BGV A1 "General regula-
tions" and BGV A2 "Electrical systems and equipment".
à The risk assessment and installation of the sensor and the door system in
compliance with national and international regulations and door safety
standards are the responsibility of the door manufacturer.
à Any uses of the device other than those described in this manual do not
correspond to the approved purpose and cannot be guaranteed by the
manufacturer.

GEZE GC 363 R Specifications

General

Brand	GEZE
Model	GC 363 R
Category	Security Sensors
Language	English