GEZE GC 363 SF - Page 22

Settings GC 363 R / SF
22
X
GC 363 SF only: Do not use automatic direction detection mode (parameter RAD:Direction 5 to 7) if the sensor is used in an emergency exit.
BASIC menu
0 1 2 3 4 5 6 7 8 9
Back / Continue Comfort default settings
Standard
1
Dicult
cond.
2
Shopping
street
3
1
Factory settings
2
Increased immunity lter + 1 curtain
3
Increased immunity lter + diversion = movement and presence
Not permitted for FR doors!
RAD: Size
small >
> >
> >
>
> large
RAD: Output
Closer
Opener
Opener
Closer
Opener
Opener
Closer
Closer
Current
Opener
Frequency
*)
Opener
AIR: Filter
< 2.8 m > 2.8 m
To ensure compliance with EN 16005 and DIN 18650, the values 6 and 7 must be selected for an installation height of 2.8 m or more
low normal high
higher highest normal high
not compliant with
DIN18650 / EN16005
Inside Outside
AIR: Frequency
A
B
Use dierent frequencies for sensors which have been installed next to or above one another.
Back / Continue
*) Standard setting GC 363 SF