Operating instruction SG 125 4 Product design, equipment
9
4.2 Standard equipment
Basic machine
– Compact, sturdy design, distortion-free machine bed
– Handwheel to move the machine slide via rack
Heating element
– With electronic temperature control (or thermostatic control)
– High temperature accuracy of 4 °C
Additional basic equipment
– Universal, left and right prismatic clamping unit, complete, for
clamping pipe and fitting
– Depth stop
– V-shaped pipe supports d 20–125 mm
– Back stop
– Machine-specific tool set
– Timer to clock fusion time
– 3 Allen wrenches with T-handle SW 5, SW 6 and SW 8
– 1 combination wrench SW 19
– 3 cap screws M8 x 40
– 1 cap screw M6 x 40
– 1 positioning pin 4 mm for heating spigot and bushes
– Instruction manual
To Next Page
