The Signet 2552 Metal Magmeter from Georg Fischer features all-stainless steel
construction. The PVDF nosepiece and FPM O-rings are the only other wetted materials.
The 2552 installs quickly into standard 1¼ in. or 1½ in. pipe outlets, and is adjustable to
t pipes from DN50 to DN2550 (2 to 102 inches). Two sensor lengths allow maximum
exibility to accommodate a variety of hardware congurations, including ball valves for
hot-tap installations.
When equipped with the frequency output, the 2552 is compatible with any Signet ow
instrument, while the S
3
L Digital output enables multi-channel compatibility with the
Signet 8900 Multi-Parameter Flow Controller. Select the blind 4 to 20 mA current output to
interface directly with dataloggers, PLCs or telemetry systems.
Key features include Empty Pipe Detection, LED-assisted troubleshooting, and Bi-
Directional span capability (in 4 to 20 mA models).
The Signet 3-0252 Conguration Tool is available to customize every performance feature
in the 2552 so it can be adapted to the user's application requirements.
*3-2552.090*
3-2552.090 Rev. 6 10/18
Signet 2552 Metal Magmeter
English
Operating Instructions
Description
Table of Contents
• English
• Deutsch
• Français
• Español
• Italiano
• Português
• 中文
3-2552-33-2552-2
Warranty information .............................................................................. 2
Product Registration ............................................................................... 2
Safety Information .................................................................................. 2
Environmental Recomendations............................................................. 2
Specications ...................................................................................... 2-3
Dimensions ............................................................................................. 4
Selecting a Location ............................................................................... 4
General Installation................................................................................. 4
Vertical Installation.................................................................................. 4
Horizontal Installation ............................................................................. 5
Sensor Conditioning ............................................................................... 5
Grounding ............................................................................................... 5
Preparing for Installation......................................................................... 6
H-Dimension ........................................................................................... 6
Magmeter Installation ............................................................................. 7
Frequency Output Wiring........................................................................ 9
Digital (S
3
L) Output Wiring ...................................................................... 9
4 to 20 mA Loop Output Wiring ............................................................ 10
Calibration Data ............................................................................... 11-12
Technical Support ................................................................................. 13
Troubleshooting .................................................................................... 14
Maintenance ......................................................................................... 14
Sensor Selection .................................................................................. 15
Ordering Information............................................................................. 16
To Next Page
Need help?
General
