GFI System SPECULAR REVERB V3 User Manual

User Manual
SPECULAR
V3
REVERB
TableofContents
1. Overview 2‐4
2. Operation 5‐7
4. AssigningParametersforExpressionControl 9‐10
5. Modes/Algorithms 11‐16
3. KillDryFunction 8
6. AutoIntensitySwell 17‐18
7 FactoryReset 19
*Important‐mustread*
1
CHAPTER1‐Overview


What’snewinSpecularV3:

 ExpressionPedal/Tap‐Tempopedali nput
 Kill‐Dryfunction
 Presetsystemisnowdecoupledfromalgorithms,whichmeansit’snowpossibletostoreany
algorithmstoanypresetlocation.
 Multi‐coloredLEDuniquelyidentifiesalgorithms.
 Tap‐Tempo(withsubdivisions)isnowavailablefortheEchoalgorithm.
 Newartwork.

SpecularReverbV3 has identical sounds as V2,withtheexception of the mode Echo,which now
has800msofmaximumdelaytime(V2’sEchohas600ms).

SamecompactfootprintasSpecularV2.
2

GFI System SPECULAR REVERB V3 Specifications

General

Brand	GFI System
Model	SPECULAR REVERB V3
Category	Recording Equipment
Language	English

Summary

Overview of Specular V3

Operation and Preset Management

Preset System Structure

Describes the 8 preset locations organized in 2 banks, each with 4 patches.

Saving Presets

Instructions for saving presets by holding the Engage footswitch until LEDs flash 3x.

Loading Presets

Steps to select and load a preset using Preset Select switch and Engage footswitch.

Loading Presets Across Banks

Procedure to load a preset from a different bank by toggling the bank selection.

Engaging and Bypassing

How to engage or bypass the pedal using the Engage footswitch.

Kill Dry Functionality

Expression Control Assignments

Entering Edit Mode for Assignments

Procedure to enter EDIT mode by pressing and holding the Mode/Edit button.

Exiting Edit Mode

Procedure to exit EDIT mode by pressing and holding the Mode/Edit button.

Modes and Algorithms Explained

Auto Intensity Swell Feature

Factory Reset Procedure