GFL 3012 - Technical Data

Schüttelapparate - Shakers
3012 / 3014 / 3017 / 3018 / 3020
Seite 15 von 24 Rev.1
7. Technical data
Exterior dimensions (WxDxH) / Model 3012 510 x 625 x 175mm / 450 x 450mm
Shaking platform (WxD) Model 3014 510 x 625 x 175mm / 450 x 450mm
Model 3017 510 x 625 x 145mm / 450 x 450mm
Model 3018 510 x 625 x 145mm / 450 x 450mm
Model 3020 745 x 730 x 135mm* / 676 x 540mm
*Dimension without support rod
Load, even load distribution Models 3012, 3014, 3017
and 3018
max. 15 kg
Model 3020 max. 30 kg
Shaking motion / Model 3012 three-dimensional orbital rocking /
Shaking amplitude / 3 degrees to horizontal /
Shaking frequency 2 – 50 min
-1
Model 3014 rocking /
3 degrees to horizontal /
2 – 50 min
-1
Model 3017 orbital / 30 mm / 20-300 min
-1
Model 3018 reciprocating / 30 mm / 20-300 min
-1
Model 3020 orbital / 32 mm / 20-250 min
-1
with platform frame 3981 20-200min
-1
Electrical connection all models 115 V or 230 V, +/-10%,
50 or 60 Hz
Mains fuse all models, house mains circuit protected by 10 Amp
Power Models 3012, 3014 and
3020
90 W
Models 3017 and 3018 65 W
Protection type / class all models I / IP20
Surrounding conditions all models Use only inside buildings
(not in explosion endangered surroundings
Temperature all models +10°C bis +50°C
Humidity all models max. 70% rel. humidity up to 31°C,
decreasing to 50% rel. humidity at
50°C, non-condensing.
Weight Model 3012 17.4 kg
Model 3014 15.4 kg
Models 3017 und 3018 16.8 kg
Model 3020 32.7 kg