Ghost Controls TSS1 - Page 23

23
© G host C ontr ols
®
2 0 2 0
B. Connect the terminal leads of the battery harness to your battery.
IMPORTANT
YOU NEED A 12V DEEP CYCLE MARINE/AUTOMOTIVE BATTERY OR THE ABBT2 BATTERY BOX KIT WITH
TWO BATTERIES. SYSTEM WILL NOT OPERATE WITHOUT A BATTERY INSTALLED AND CONNECTED AT
ALL TIMES.
C. Connect the battery harness from the control box to the battery.
Make sure
Make sure the
Strain Relief
(ABBT2) BATTERY BOX KIT
INCLUDES 2 BATTERIES
FOR SOLAR APPLICATIONS
2 BATTERIES IN BOX ALWAYS
RECOMMENDED
OR