To Next PageTo Next PageWhat does it mean when my Ghost Controls DTP1 beeps indicate the battery condition?
The beep codes from your Ghost Controls gate opener indicate the battery condition. Specifically, 1 beep signifies a good battery, while 4 beeps indicate a low battery.
What does it mean when my Ghost Controls DTP1 beeps when an arm is disconnected?
The beep codes from your Ghost Controls gate opener indicate if an arm is disconnected. 5 beeps mean the first arm is disconnected, and 6 beeps mean the second arm is disconnected.
What happens if I cycle the control box power switch on my Ghost Controls Gate Opener?
Cycling the control box power switch on your Ghost Controls gate opener will disable both PartyMode® and VacationMode®.
What does it mean when my Ghost Controls DTP1 beeps when VacationMode® is enabled?
The beep codes from your Ghost Controls gate opener indicate whether VacationMode® is enabled or disabled. 32 beeps mean VacationMode® is enabled, while 2 beeps mean it is disabled.
Information on safety features and potential entrapment hazards.
Key guidelines and prerequisites for using the gate opener system.
Considerations for selecting the optimal location and preparing the gate.
Configuration options for the gate opener system via DIP switches.
Steps for installing the operator arm for push-to-open gates.
Steps to program a new remote transmitter to the gate opener.
Adjusting gate limits for pull-to-open and push-to-open installations.
Specific instructions for connecting the Zombie Gate Lock accessory.
Essential steps for manually opening or closing the gate.
General| Type | Swing Gate Opener |
|---|---|
| Motor Type | DC |
| Max Gate Length | 20 ft |
| Control Type | Remote Control |
| Gate Type | Swing |
| Warranty | 18 months |
| Gate Length | Up to 20 ft |
| Control Options | Keypad, Remote |
| Safety Features | Obstruction sensing |
