GHOST
User Manual Status 04/2009 // Spec 2010
10.100
Danger of material damage!
When the rear wheel has been removed, the frame and/or gear shift mechanism
may be damaged.
After removing the rear wheel, lay the bike on its left side or use a suitable
assembly stand.
Installing the wheels.
First install the rear wheel.
1. a) Insert the rear wheel:
• Raise the bike at the rear,
• place the rear wheel under the frame so that the chain fits over the smallest
pinion.
• With disc brakes: Insert the wheel so that the brake disc slides smoothly
between the brake pads.
To Next Page
Loading...
