GHOST
User Manual Status 04/2009 // Spec 2010
7.72
The best braking effect is achieved by correctly dosing the actuation of both
brake levers at the same time.
7.8 Operating the quick-release hub axle
Danger of personal injury and material damage!
Incorrect installation of the wheels using the quick-release hub axle can lead to
dangerous riding situations, falls, accidents and material damage.
Observe the following description for operation of the quick-release hub
axle
Familiarise yourself with the use of the quick-release hub axle
Practice the installation and removal of the wheels with the quick-
release hub axle several times
Inspect the wheels as described in chapter 6.1.1 after every installation
If you are not sure about the correct fitting after installation of the
wheels, do not
use the bike and contact your dealer.
Risk of burns!
The quick-release levers on disc brakes can become hot while riding.
Touch the quick-release lever briefly with your bare finger.
If it feels hot, allow it to cool down.
To Next Page
Loading...
