GHOST
User Manual Status 04/2009 // Spec 2010
7.67
7.6.2 Sram MTB
Your gear shift has two levers. Lever A is used to shift to a larger chainwheel or pinion, lever B to a
smaller chainwheel or pinion.
1. Shifting to a larger sprocket:
• You must pedal while shifting.
• Press the lever with your thumb beyond the first locking step and hold it
pressed until the desired gear is engaged.
• For faster shifting over several sprockets, press the lever completely
forward and hold it pressed until the desired gear is engaged.
2. Shifting to a smaller sprocket:
• You must pedal while shifting.
• Press lever B until you feel an engagement and then release the lever again
immediately.
A
To Next Page
Loading...
