GHOST
User Manual Status 04/2009 // Spec 2010
4.29
5. Bottle holders:
• The thread sets are provided for the attachment of commercially available
bottle holders. The maximum tightening torque of the screws for fastening
the bottle holder to the frame is 4 Nm.
6. Roller training:
• The use of roller trainers with rigid clamping is not
permitted. The rigid
clamping of the fork ends or quick-release axle exerts loads that differ
significantly from those occurring during the permitted use for riding. This
can result in damage to the bike frame.
• Use on a loose roller without rigid clamping of the frame is permitted.
CAUTION: This presupposes the necessary know-how!
7. Transport:
• Take particular care when transporting bikes with carbon frames. As with
our bikes with aluminium frames, they may only be transported inside motor
vehicles.
• Protect particularly the frame from contact with other parts. Use blankets or
similar protective covers.
• As with all our bikes, no rack systems or the like may be used that employ
clamping elements for fixing and attachment. The clamping forces may
cause damage to the tubes.
• Do not place other objects on the frame.
• Ensure that the bike cannot slip during transport.
To Next Page
Loading...
