GHOST
User Manual Status 04/2009 // Spec 2010
6.48
• It must not be possible to pull the brakes blocks out of the shoes by hand. A
slight backlash is normal.
3. Check the position of the brake shoes.
• When the brakes are applied, the brake shoes must contact the rim flank
with practically their whole surface area.
• In no position, i.e. even when the brakes are not applied, may the brake
shoes touch the tyres.
4. Check the wear of the brake blocks.
• Unhook the brakes for the inspection (see chapter 10.1).
• The brake blocks must not be worn beyond the wear indicator.
To Next Page
Loading...
