GHOST
User Manual Status 04/2009 // Spec 2010
7.63
Sram Force / Rival / Red
With a derailleur gear system the gears are changed by shifting the chain to
another sprocket. At the pedal cranks these sprockets are referred to as
“chainwheels”, at the sprocket assembly “pinions”.
• The combinations shown in grey result in increased noise development and
material wear and should generally be avoided.
• Avoid: Largest chainwheel + largest pinion
• Smallest chainwheel + smallest pinion
The left-hand lever is used to operate the front derailleur, the right-hand lever
to operate the rear derailleur.
Chainwheels
Sprockets
To Next Page
Loading...
