Gianneschi ACB 60 - Troubleshooting Pump Defects

19
DEFECT
CAUSE
SOLUTION
- The Motor
does not start
- No Voltage
- Check the
value of the line voltage
- Impeller
Blocked
- Clean the
impeller and the pump
casing
- Motor
detective
- Consult a
Gianneschi Service or
dealer
- The motor run
but the pump not work
- Valve and
filter dirty
- Clean valve
and filter
- Suction
depth to height
- Install the
pump neas the water
static level
- Air in suction
- Check the
air-tightness of the pipe
- The pump
was not fill up with
water
- Fill up the
pump
- Wrong
direction of rotation
- Invert two
polarity
- The pump
make noise
- Air in the
pipes
- Put out the
air
- Insufficient
pressure
- The liquid
has too viscosity
- Check the
viscosity if the liquid
- Impeller and
diffuser damaged
- Replace the
parts
- Pressure
request by the system
other than the
possibility of the pump
- Change the
pump model