Giant Crest 34 - Page 13

13
4
清潔螺絲螺牙並上油。
鎖緊氣壓室下方螺絲至扭力值 10Nm。
註：請確保鎖緊至標準扭力值。
Clean and apply grease to threads at the
bottom of the chamber.
Tighten the bottom nut to 10Nm.
Note: Make sure to tighten the bottom nut to
recommended torque value.
5
在氣壓室滴入 6c.c Mobil SHC 627。
Inject 6c.c. of Mobil SHC 627 into air
chamber. Other oils may be used; please check
with Giant ASQA to confirm compatibility.
6
清潔螺絲螺牙並上油。
鎖緊氣壓室螺絲至扭力值 24
Nm。
註：請確鎖緊至標準扭力值。
Clean and grease air spring cap threads. Never use
alcohol to clean.
Tighten the air spring cap with token set into the
stanchion to 24Nm. Note: Make sure to tighten the
air spring cap and token set to recommended torque
value.
Grease
Grease
10Nm
24Nm
6c.c