Giant Crest 34 - Damper Side Disassembly

8
阻尼側拆解 Damper Side Disassembly
1
使用一字起子拆開阻尼側上蓋。
註：小心裡面的鋼珠。
Gently pop the LSC cap off using a flathead
screwdriver. Note: When removing cap, be
careful not to lose steel ball bearing and spring
located underneath.
2
夾起鋼珠及彈簧。
Carefully remove the the steel ball bearing and spring and set aside in a safe place.
3
取出 LSC 調整軸。
Remove the LSC adjustment knob.