Gibson GDFA10DGSWD - Page 28

28
Cleaning and Maintenance
Close the water supply to the Dishwasher
and leave the door slightly open to prevent
the formation of odours and moisture
inside.
Do not use solvents or abrasive cleaners
Do not use solvents or abrasive cleaners
to clean the outside and the rubber parts of
the Dishwasher.
Use only a cloth dampened in lukewarm
water and a neutral detergent.
To remove stains on the surfaces inside,
use a cloth dampened in water and a little
white vinegar or a cleaner specic for use
in a dishwasher.
When you go on vacations
Before you leave for a certain period, we
recommend you to program a washing
cycle with an empty Dishwasher. Then,
remove the power cord from the power
outlet, close the water supply faucet to the
Dishwasher and leave the door slightly
open. This will help keep the seals in good
conditions and avoid the formation of
odours inside the product.
Moving the appliance
If the Dishwasher needs to be moved, try to
keep it in the vertical position. If this is not
possible, it may be lay down with the back
side facing down.
Seals
One of the reasons that cause the
formation of odours within the Dishwasher
is the residues that are left in the seals. Do
a periodic cleaning with a damp sponge to
avoid the odours.