Ethernet port
The ethernet port can be connected to a switch to communicate with your Ultimate over your own
local network.
The Ultimate 1541-II+ and Ultimate 64 have an integrated ethernet port.
Ultimate 1541-II and compatible usb ethernet adaptor
The Ultimate 1541-II needs a compatible USB Ethernet adaptor that is connected to the USB port of
the Ultimate 1541-II. Any USB2LAN adapter that uses an AX88772/-A/-B chip should work.
Please note that the compatible USB Ethernet adaptors will ONLY be stable on the Ultimate
1541-II if the firmware < 3.2. They will work fine on the Ultimate 1541-II+ and Ultimate 64.
If your Ultimate product has an ethernet port, you can see this when entering the Ultimate menu.
The picture above shows a Net0 port, this indicates ethernet is accessible.
To Next Page
Loading...