To Next Page

To Previous Page

2-8 Save & Exit

& Save & Exit Setup

Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup

program. Select No or press <Esc> to return to the BIOS Setup Main Menu.

& Exit Without Saving

Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made

in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.

& LoadOptimizedDefaults

Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults

settings help the system to operate in optimum state. Always load the Optimized defaults after updating

the BIOS or after clearing the CMOS values.

& BootOverride

Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes

to conrm. Your system will restart automatically and boot from that device.

& SaveProles

This function allows you to save the current BIOS settings to a prole. You can create up to 8 proles and

save as Setup Prole 1~ Setup Prole 8. Press <Enter> to complete. Or you can select SelectFilein

HDD/FDD/USB to save the prole to your storage device.

& LoadProles

If your system becomes unstable and you have loaded the BIOS default settings, you can use this function

to load the BIOS settings from a prole created before, without the hassles of reconguring the BIOS

settings. First select the prole you wish to load and then press <Enter> to complete. You can select Select

FileinHDD/FDD/USB to input the prole previously created from your storage device or load the prole

automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked

properly (last known good record).

- 36 -

GIGA-BYTE TECHNOLOGY A520M S2H User Manual

Questions and Answers: