17) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS conguration and reset the CMOS values to actory deaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins or a ew seconds.
18) QFLASH_PLUS (Q-Flash Plus Button)
Q-Flash Plus allows you to update the BIOS when your system is o (S5 shutdown state). Save the latest
BIOS on a USB thumb drive and plug it into the Q-Flash Plus port, and then you can now fash the BIOS
automatically by simply pressing the Q-Flash Plus button. The QFLED will fash when the BIOS matching
and fashing activities start and will stop fashing when the main BIOS fashing is complete.
For how to use Q-Flash Plus please visit the "Unique Features" webpage o GIGABYTE's
website.
QFLASH_PLUS
QFLED
• Always turn o your computer beore clearing the CMOS values.
• Ater system restart, go to BIOS Setup to load actory deaults (select Load Optimized Deaults) or
manually congure the BIOS settings (please navigate to the "BIOS Setup" page o GIGABYTE's
website or more inormation).
Open: Normal
Short: Clear CMOS Values
- 23 -
To Next Page
Loading...
