Startup Screen:
Function Keys:
<DEL>: BIOS SETUP\Q-FLASH
Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F12>: BOOT MENU
Boot Menu allows you to set the rst boot device without entering BIOS Setup. In Boot Menu, use the up
arrow key <h> or the down arrow key <i> to select the rst boot device, then press <Enter> to accept.
The system will boot rom the device immediately.
Note: The setting in Boot Menu is eective or one time only. Ater system restart, the device boot order
will still be based on BIOS Setup settings.
<EN D>: Q-FLASH
Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup rst.
The ollowing startup Logo screen will appear when the computer boots.
Function Keys
- 25 -